3D Printing Phenomenon

What is 3D printing and what kind of impact will it have on your life?

3D printing is both an analog and digital process. Melted plastic is layered to create objects in real life – this is probably why I’m excited by it!

Do you remember in those old sci-fi shows where the crew of a spaceship would press a few buttons on a machine and out popped food or a thing?

Star Trek Worf infront of food replictoar
Worf, from Star Trek, gets a good dinner.

Replicators were somehting that existed in our minds and our stories way before even primitive versions were in prototype. 3D printers are real life versions of sci-fi replicators.

Star Trek crew gets food shot at him from the food replicator.
When food replicators go bad.

While the imaginative replicators used molecules to make things “out of thin air” – 3D printers are more down to earth. They use plastic (which is often recyclable and soon to be recycled.) which is melted and extruded.

The process first begins with an idea – what thing needs to be made? How do we go about designing it? Computer Aided Design (CAD) software, used in engineering, brings an idea to life. Luckily, for the average person, there are many sites that are simple enough for even kids to use. Check out:

Autodesk 123D



These online tools also have completed designs uploaded that you can use and manipulate.

Your 3D design is saved as a file the 3D printer can read, often as .OBJ.

The design is made up of hundreds or thousands of thin layers. These layers are extruded one on top of the other to create the 3D object.

Loaded into the printer software, you are able to manipulate how the object will sit on the printer platform.

MakerBot 3D printer software to position 3D objects
MakerBot software

Depending on how you position your thing, the printer will add supports to aid in the printing process, that can be broken off later. The printer almost always adds a base for stability, which can be broken off later.

MakerBot Replicator 2
MakerBot 3D printer
3D printer prints a platform for object
Printing the base


A plastic cap that used the printer support base
A finished cap that used a support base in the picture above.

In many 3D printers, including MakerBot, the plastic is in the form of filament that feeds from a spool into the machine. You can see it here on the right (back) of the 3D printer:

Spool of filament sits at the back of the printer.
Plastic filament feeding into 3D printer

There are different methods of 3D printing, but this method above, called Fused Deposition Modeling (FDM) is one of the most popular and very common in consumer 3D printers. The filament is heated by the printer nozzle and the melted plastic is extruded layer by layer as the design requires. The melted plastic immediately hardens, getting ready for the next layer.

I chose a token holder (with my initials carved) as my first 3D object to print. In Toronto, you can design at, or bring your designs (in .OBJ format) to, the special Hubs in the Toronto Public Library system. Currently there are two Digital Innovation Hubs in Toronto, with a 3rd on its way. The Hub at the Fort York branch has two printers you can book.

printer nozzle adds layers to 3D object
Nozzle moving across the first part of the token holder.

token holder being printed

Printer finishes off the 3D token holder
Token holder nearly complete
Printer is done printing token holder, which still sits on base support.
Finished token holder (notice support base)

Watch an eLearning module that takes you through the whole 3D printing process here. Or watch a short video on the process here.

The technology quickly became cost-effective for consumers, and prices of 3D printers range from $250 to $2,000.

Still in its infancy, home users tend to create object like these:

3D objects of all sorts, colours, mostly very small
Range of 3D printed objects

But amazing things are coming out of the 3D printing world.

In China, a company is 3D printing houses, using cement and construction waste. The houses cost about $5,000. Watch the video here.

a concrete and construction waste house printed by a 3D printer
3D printed house

There are many other useful objects that people are printing:

hand holds a pink 3D ear that hears
A 3D ear that can hear
red lace type of guitar body, 3D printed
3D guitar that really plays
lacey looking 3D printed high heel shoes in black
3D printed shoes

And yes, finally, even 3D printed food is a reality! Watch the video here.

dough is extruded, then sauce, then cheese, then it is baked
How a 3D pizza is made

It is not, however, a “gift from the gods”, as there are still real issues, both ethically and physically. Does the world need more plastic things?

Although recyclable, the plastics still give off toxins when heated. The printers also use a lot of energy. 3D printers consume 50 to 100 times more energy than injection molding. PLA plastic is biodegradable, and used by the Toronto Public library.

The most common things to be printed are household items, including dishware. The most common plastic for home printing is ABS plastic, which has the chemical BPA, known to cause cancer.

Finally, there’s the stone cold reality that some people are printing weapons. This does not allow me to put my full faith in this technology.

A blue and white 3D printed gun that uses real bullets
3D printed, working gun

Will 3D printing ever be more than just a fun thing you do at a friend’s house or at the library? Consumers will decide how far the technology will go. Perhaps until we learn how to replicate molecules, at best we will make a few trinkets and funny looking clothes. And maybe that’s ok. Technology can quickly get ahead of us and take on characteristics that no one predicted or wanted.

Personally, I would like to see the technology remain fun and ethical, with little impact on the environment or health.

Don’t forget This Analog Earth! is now on Pinterest!

Like most blogs, This Analog Earth! is made up of research and wise knowledge gathered over the years. Here is a list of resources I got information and images from:









1 thought on “3D Printing Phenomenon

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s